0

企业微信二维码

APP

联系我们

联系我们

4006-618-301

在线客服

问题反馈

64体育低调看NBA直播状态:
  • 快速预览
    适用范围:This document gives the safety requirements and measures for stationary and displaceable hand-fed single spindle vertical moulding machines, hereinafter referred to as “machines”, designed to cut wood and materials with similar physical characteristics to wood. NOTE 1 For the definitions of stationary and displaceable machines, see ISO 19085-1:2017, 3.4 and 3.5. It deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are also taken into account. NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100. It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: a) device for the arbor to be vertically adjustable relative to the table; b) device to tilt the arbor; c) device to fit a manually operated tenoning sliding table; d) glass bead saw unit; e) adjustable table insert; f) device for changing the direction of rotation of the spindle; g) device for fixing shank mounted tools on the arbor; h) interchangeable arbor; i) quick tool/arbor change system; j) demountable power feed unit; k) support for the demountable power feed unit with power driven adjustments. This document does not apply to 1) machines equipped with outboard bearings, 2) machines equipped with powered movements of a front extension table and/or a tenoning sliding table, and 3) machines with an intended maximum tool diameter of less than or equal to 180 mm. NOTE 3 Hand-held motor-operated electric tools are dealt with in IEC 60745-1 together with IEC 60745-2-17. NOTE 4 Transportable motor-operated electric tools are dealt with in IEC 61029-1:1990, IEC 61029-2- 8:1995/AMD1: 1999 and IEC 61029-2-8:1995/AMD2: 2001 This document is not applicable to machines intended for use in potentially explosive atmospheres, or to machines manufactured prior to the date of its publication
  • 废止 ISO FDIS 19085-8-2017 Woodworking Machines - Safety - Part 8: Calibrating And Sanding Machines

    发布日期: 2017-08-25 来源: 新信64体育低调看NBA直播
    快速预览
    适用范围:This document gives the safety requirements and measures for stationary calibrating and sanding machines, with an integrated feed and one or more sanding belt units positioned above and/or below the work piece level, with manual or automatic loading and/or unloading, hereinafter referred to as “machines”. It deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. NOTE 1 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010. It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: — transversal sanding unit; — cleaning brushing unit; — satining roller unit; — disk brushing unit; — texturing brushing roller unit; — texturing brushing belt unit; — cutterblock unit; — texturing band saw unit; — spiked roller unit; — antistatic bars; — conveyor directly controlled by the machine; — additional work piece vacuum clamping. The machines are designed to calibrate and/or sand work pieces, in shape of panels or beams, consisting of: a) solid wood; b) material with similar physical characteristics to wood (see ISO 19085-1:2017, 3.2); c) gypsum boards, gypsum bounded fibreboards; d) composite materials with core consisting of e.g. polyurethane or mineral material; e) composite boards made from the materials listed above; f) all materials listed above, also already lacquered. This document does not deal with hazards related to: — specific devices other than those listed above; — access through in-feed and out-feed openings of machines with a work piece height capacity greater than 550 mm; — systems for automatic loading and/or unloading of the work piece to/from a single machine; NOTE 2 Loading the machine manually includes manually placing the work piece onto a conveyor directly controlled by the machine. Unloading the machine manually includes manually removing the work piece from a conveyor directly controlled by the machine. — interfacing of the machine with any other machine. It is not applicable to machines intended for use in potentially explosive atmosphere and to machines manufactured prior to the date of its publication.
  • 有效 BS EN ISO 22775-2004(R2014) Footwear - Test Methods For Accessories: Metallic Accessories - Corrosion Resistance

    发布日期: 2014-12-16 语言: 英文 来源: 新信64体育低调看NBA直播
    快速预览
    适用范围:There is no abstract currently available for this document
  • 有效 BS EN ISO 15978-2002(R2004) Open End Blind Rivets With Break Pull Mandrel And Countersunk Head Aia/St

    发布日期: 2004-11-29 语言: 英文 来源: 新信64体育低调看NBA直播
    快速预览
    语言:英文
    适用范围:There is no abstract currently available for this document
  • 废止 ISO FDIS 19141-2000 Geographic Information - Schema For Moving Features

    发布日期: 2000-01 来源: 新信64体育低调看NBA直播
    快速预览
    适用范围:There is no abstract currently available for this document
  • 快速预览
    适用范围:This document provides an overview of smart contracts in BC/DLT systems; describing what smart contracts are and how they work. It also discusses methods of interaction between multiple smart contracts. This document focuses on technical aspects of smart contracts. Smart contracts for legally binding use and applications will only be briefly mentioned in this document.
  • 有效 ISO 1750-1981(R2018) Pesticides And Other Agrochemicals - Common Names

    发布日期: 2018-01 来源: 新信64体育低调看NBA直播
    快速预览
    适用范围:There is no abstract currently available for this document
  • 快速预览
    适用范围:This document specifies the general aspects of polyethylene (PE) compounds for the manufacture of pressure pipes and fittings (mains and service pipes) for buried or above ground applications, intended for the conveyance of: — water for human consumption; — raw water prior to treatment; — drainage and sewerage under pressure; — vacuum sewer systems; — water for other purposes. This document also specifies the test parameters and requirements for the test methods referred to in this document. In conjunction with other parts of the ISO 4427 series, this document is applicable to PE pipes and fittings, their joints and to joints with components made of PE and other materials, intended to be used under the following conditions: a) a maximum allowable operating pressure (PFA) up to and including 25 bar1); b) an operating temperature of 20 °C as the reference temperature. NOTE 1 For other operating temperatures, guidance is given in Annex A. The ISO 4427 series covers a range of maximum allowable operating pressures and gives requirements concerning colours. NOTE 2 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and installation practices or codes. 1) 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.
  • 废止 ISO FDIS 4506-2000 Hardmetals - Compression Test

    发布日期: 2000-01 来源: 新信64体育低调看NBA直播
    快速预览
    废止 ISO FDIS 4506-2000 Hardmetals - Compression Test
    适用范围:There is no abstract currently available for this document
  • 快速预览
    适用范围:This document covers the following phased array probes used for ultrasonic non-destructive testing in contact technique (with or without a wedge) or in immersion technique, with centre frequencies in the range 0,5 MHz to 10 MHz; — linear, — encircling, — 2D matrix, — Partial annular sectorial (Type ‘daisy’) This document specifies the characterisation tests that have to be done at the end of the fabrication of a phased array probe. It defines both methodology and acceptance criteria. This document does not describe methods and acceptance criteria to characterise the performance of an ultrasonic phased array instrument or the performance of a combined system. These are described in ISO 18563-1 and in ISO 18563-3.
  • 废止 ISO DIS 4506-2017 Hardmetals - Compression Test

    发布日期: 2017-05-19 来源: 新信64体育低调看NBA直播
    快速预览
    废止 ISO DIS 4506-2017 Hardmetals - Compression Test
    适用范围:This International Standard specifies a method of determining the ultimate strength and proof stress of cemented carbide under uniaxial compressive loads
  • 快速预览
    适用范围:This document, read in conjunction with ISO 11299-1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground gas supply networks. It is applicable to polyethylene (PE) pipes of three different types: — PE solid wall single layered pipes (nominal outside diameter, dn), including any identification stripes; — PE pipes with co-extruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex A, where all layers have the same MRS rating; — Coated PE pipes (outside diameter, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe (“coated pipe”), as described in Annex A. In addition it covers: — jointing of pipe lengths by means of butt fusion; — fabricated and injection-moulded fittings made of PE; It is applicable to PE pipes, fittings and assemblies intended to be used at an operating temperature of 20 °C as the reference temperature. NOTE For other operating temperatures, guidance is given in ISO 4437-5:2014.
  • 快速预览
    适用范围:This document specifies the performance and testing requirements for accelerators used with dry pipe valves in fire protection systems to hasten the operation of the valves when one or more sprinklers operate.  
  • 有效 BS EN ISO 16585-2002(R2018) Closed End Blind Rivets With Pull Mandrel And Protruding Head — A2/Sst

    发布日期: 2018-11-12 语言: 英文 来源: 新信64体育低调看NBA直播
    快速预览
    语言:英文
    适用范围:There is no abstract currently available for this document
  • 快速预览
    适用范围:This document specifies particular elements of a maturity model. These elements conform to ISO/ IEC 33004. Organizations can use these elements in combination with their own assessment indicators to determine the maturity level of processes for data quality management as specified by ISO 8000-61. The following are within the scope of this document: — some of the elements of a model for assessing organizational process maturity; — identifying those elements that exist in other standards (process capability levels, process attributes, ordinal scale for measuring process attributes and the scheme for derivation of process capability levels from process attribute rating); — specifying six maturity levels and process profiles to indicate when organizations have achieved each of the maturity levels; — providing guidance on how to assess the maturity level of an organization. Methods or procedures to improve organizational maturity are outside the scope of this document. This document can be used by the organization itself or by another party (including certification bodies) to perform assessment of the maturity. This document can be used in conjunction with, or independently of, quality management systems standards.
  • 1
  • 2
  • 3
  • 4
  • ...
  • 4758
  • 共4758页

    跳到
    确定